A Comprehensive Guide to Selecting and Caring for Centrifuge Tubes

0
8χλμ.

When selecting centrifuge tubes, it’s important to consider the material, sealing mechanism, clarity, and chemical resistance needed for your application. This guide covers tips for choosing the right tubes and rotor types as well as best practices for cleaning, storage and centrifugation. Properly caring for tubes ensures sample integrity, prevents leakage or breakage, and prolongs tube life.

Key Factors in Selecting Tubes

  1. Assess suggested sample volume and max speed using product guidelines or package labels

  2. Match tubes carefully to rotor type to prevent breakage and sample loss

  3. Consider chemical resistance based on material: PP and PA are opaque with good resistance; PC and PET are clear with poor resistance

Popular Rotor Types and Recommended Tube Orientation

  • Swinging bucket rotors: Tubes hang vertically then swing out horizontally during rotation
  • Fixed angle rotors: Tubes remain fixed at an angle during rotation
  • Vertical rotors: Tubes stay vertical throughout rotation
  • Fill thin-walled sealed tubes completely for fixed angle or vertical rotors

Proper Cleaning and Sterilization of Tubes

  • Clean with mild detergent, warm water, rinse and air dry
  • Avoid glassware washers or dishwashers due to excess heat
  • Only autoclave if necessary, at 121°C for 15 minutes
  • Prevent sample loss by matching tubes carefully to rotor

Safe Centrifugation Practices

Always balance tubes properly in centrifuge. Never exceed max speed rating for tubes. Stop rotation immediately if an imbalance is suspected. Avoid overfilling tubes beyond stated capacity

Proper Storage for Optimal Tube Lifespan

Store tubes with caps loosened in a cool, dry location. Ensure tubes are fully dried after washing before capping for storage. Regularly inspect tubes for cracks/wear and replace as needed. Follow manufacturer date recommendations for tube expiration/replacement

Signs Your Tubes May Need Replacing

Fogging, crazing or discoloration of plastic. Difficulty closing or opening caps properly. Leaks at cap seam or bottom seal. Cracks along tube body or cap

Conclusion

By selecting the optimal centrifuge tubes for your application and properly caring for them during use, cleaning and storage, you can ensure reliable performance and lifespan. Always adhere to safety best practices during centrifugation to prevent tube breakage and sample loss. Reference manufacturer guidelines and replace tubes at first signs of wear.

Αναζήτηση
Κατηγορίες
Διαβάζω περισσότερα
Παιχνίδια
Where to Buy Monopoly Go Stickers and Cards for the Ultimate Monopoly Card Game Experience
Where to Buy Monopoly Go Stickers and Cards for the Ultimate Monopoly Card Game Experience...
από Casey 2024-11-09 03:03:34 0 2χλμ.
Παιχνίδια
Ultimate Guide to FUT Coins: Unlocking the Value of FIFA Coins in FC 26 Coin Economy
Ultimate Guide to FUT Coins: Unlocking the Value of FIFA Coins in FC 26 Coin Economy In the...
από Casey 2025-06-15 04:21:38 0 233
Παιχνίδια
Scopri le Migliori Pegatinas Monopoly Go: Dove Comprare Adesivi e Stickers Unici!
Scopri le Migliori Pegatinas Monopoly Go: Dove Comprare Adesivi e Stickers Unici! Se sei un...
από Casey 2025-02-03 09:44:55 0 1χλμ.
Shopping
Unlock the Best Deals with Ashampoo INT Coupon Codes & Discounts
Ashampoo INT is a renowned software company known for providing top-notch utilities and...
από gettoppromotions 2025-03-26 19:49:57 0 2χλμ.
άλλο
Cognitive Search Service Market Growth Trends and Analysis 2032
  Global Cognitive Search Service Market Size, Status, and forecast for the 2025-2032. The...
από Jessie05 2025-04-24 01:58:49 0 2χλμ.