Cheap Adhesive for woodworking furniture industry Features Single Component moisture cured hot melt adhesives, non-toxic and pollution-free, mainly used on adhesion of various soft PVC/ PP/ PET/ ABS, high glossy film, acrylic and HPL, metal etc. with Particle Board and MDF etc, it has high initial viscosity, moderate open time, poach resistant and excellent weather resistance. Technical Data Viscosity (R#27, mPa.s)120鈩? 60000-70000mPa路 sCould be Adjusted according to Customer requirements Open Time (25掳C, Moisture 60%)10卤5s FeaturesGood initial strength/ Coating Weight (g / 銕?60-120Depends on base material and application Temperature (掳C)120~140Adjustable according to base material Colorglue granule in natural glue color/ Storage5-25鈩? dry and ventilated, 6 months in its original package/ Package500g-2kg/ Aluminum bag, 20kg/ Iron Can, 200kg/ Iron Can ( Adjustable) Instructions 1. The substance after hydrophobic treatment, grease and dirt on the surface of base material,would affect the fastness, specific test is a must in any case. 2. PUR Hot melt Adhesives relies on moisture reaction to acheive final lamination strength, so please check the aluminum foil carefully before use, to prevent the viscosity from sharply increase because of the damage of package, which would affect the performance ofproducts. 3. The Viscosity of PUR Hot melt Adhesive would increase after 3 hours of High Temperature, please keep the temperature under 160 掳C during down time, and do not melt the products for more than 5 hours. We suggest you to melt and use the PUR adhesive under successive operation. 4. Curing 25 掳C锛宺elative humidity above 60 %,it鈥檚 better to move to next process.Cheap Adhesive for woodworking furniture industry website:http://www.rockysuppliers.com/industrial-chain-of-woodworking-furniture/adhesive/