With the continuous improvement of the professional skills of filter presses, the old filter presses have been replaced by chamber filter presses, which are especially suitable for solving fine particles. It is widely used in organic chemistry, the metallurgical industry, and many production and processing. So how much do you know about chamber filter press?

The thickness of the filter plate of the chamber filter press is about 60~85mm. Each filter plate is all square. Then, the two sides of the filter plate become smaller by 40mm and sag to the inside. Generally, the depth of the depression is about 25mm. I am not satisfied with the upper and lower objects with a height of 8 mm, so they can be circular or strip-shaped. The actual effect is that the filter plate of the filter press has very good contact with the filter cake produced in the whole process of re-filtration, and then supports the actual effect of the filter cake.

The chamber filter press also uses a connecting hole in the center of the filter plate, which is the feeding pipeline, generally with a diameter of 100 mm. Under or around the depression, a drainage pipe hole is set up, which is connected to the sewage pipe, and the filtered liquid is discharged to the equipment. The two sides are the same.

Between the chamber filter press filter plate and the filter cloth, two general filter press filter cloths are set, and the center is connected by a filter press filter cloth cylinder with a smaller hole than the filter plate. filter press filter plate. The filter plate structure of the chamber filter press is also different. There are two kinds of filter plate structure: general filter plate and outer frame filter plate. The outer frame filter plate is formed by connecting a square strip for enclosing the filter plate. These two kinds of filter plates are alternately placed to form the filter chamber of the plate-and-frame filter press.

Chamber filter press The filter plate is made of improved polypropylene compression molding, which has high compressive strength, lightweight, corrosion resistance, non-toxicity, and no odor. Control; use hydraulic machinery as the driving force mechanism for clamping and loosening the filter plate. The clamping working pressure is 25Mpa, and the contact barometer is used to actively test the pressure; the working pressure is 1.0Mpa. The actual operation is simple, safe, and labor-saving. The actual operation is carried out through the buttons on the control panel, and the continuous operation is carried out. During the period, a variety of safety protection equipment is installed to ensure the safety of the actual operating staff.

The above is the relevant knowledge about the filter plate of the chamber filter press. If you want to know more about chamber filter press, then come and pay attention to our website.