LED explosion-proof lamp adopts the LED light source, widely used in the special flammable and explosive working environments, with the advantages of energy-saving, high light efficiency, strong lampshade and lamp cover, long service life, flexible light distribution, excellent heat dissipation, etc.

How To Select The Appropriate Marine LED Explosion-proof Light

The LED explosion-proof light is widely used in offshore homework. For the selecting of marine explosion-proof lighting, the explosion-proof structure and temperature are important points, which are very professional. Measuring the weight of heat-dissipating is a simple and effective way to select the good boat LED explosion-proof light. An appropriate power LED explosion-proof lamp, the relative weight is generally moderate. An inferior LED explosion-proof light manufacturer is unwilling to cost heat dissipating.

The LED explosion-proof light is mainly based on high-power LED lamp beads and package integrated chips, combined with external structures and applicable places. It is should be cautious to select the LED explosion-proof lighting, especially the power and lighting. The size of the LED lampshade is closely combined. Since the temperature of the LED lamp is high, the high-power lamp naturally requires a larger outer shell to achieve good heat dissipation.

Useful Tips To Maintain LED Explosion-proof Light For Long Service Life

After selecting and purchasing the LED explosion-proof light, the question of how to maintain for long service life always be paid to attention.

1. To regularly check the LED explosion-proof light, check whether the grounding is normal.

2. In order to extend the service life of the LED explosion-proof lamp, do not install the windshield device and the like in a humid environment, which has a large negative effect.

3. Regularly clean and wipe the outside dust with a dry cloth, improving the light efficiency and heat dissipation performance of the lamp and the wet cloth can’t be used. It is best to cut off the power before cleaning.

4. In the moisture environment, if there are puddles in the light, it should be maintained in time, replacing the sealing parts to ensure the protective performance of the shell.

5. If the light source is damaged, it should be turned off in a timely, so as not to cause the electrical component, such as the ballast, to be in an abnormal state due to the light source.

6. On the surface of the explosion-proof, it should be thinly coated with a replacement type anti-rust oil and should pay attention to the seal when close the lid, whether the sealing circle is working.

7. After opening the cover, it should be checked whether the composite surface of the explosion-proof combination is intact, whether the rubber seal is hard or becomes sticky, causing the wire insulation to become green and carbonized, whether the insulation and the electrical component are deformed, if discovering these problems. It should be repaired and replaced in time.

8. Check the transparent parts, whether there is a trace of foreign object impact, the protection network has loosening, corrosion, etc. If so, stop using, timely repairing and replacement.

9. The sea portion of the LED explosion-proof lamp should not be disassembled and opened.