SSAW Steel Pipe material The saw spiral welded pipe manufacturing technique is both practical and cost-effective. The Spiral Pipe Forming Mill decoils the strip, straightens it, prepares the edges for welding, and feeds it into the forming station, where the coil is formed into pipe by the operator using a remote control panel. The pipe is then rolled onto the platform and inspected visually. Submerged Arc Welded Technology is then used to weld the pipe both inside and outside. The saw spiral welded pipe is cut to the desired length after it has been shaped and welded, with all activities taking place concurrently and without interrupting the production process. After that, the saw spiral welded pipe is rolled onto the bench for inspection. Edge beveling radiography, ultrasonic testing, and hydrostatic testing are all performed in accordance with the appropriate rules and specifications. The manufacturing process is beneficial and cost-effective since pipes of various diameters may be made using the same width of basic Raw Material (H.R.Coils) by adjusting the forming angle from 10 to 45 degrees, i.e. the smaller the angle, the larger the pipe diameter, and vice versa SPECIFICATION 鈥斺€斺€?/span> Product Name: spiral steel pipe Out Diameter: 219 - 3020mm Thickness: 4 - 23mm Length: 6m, 12m or as per customer's requirement Pipe Ends: Plain, Beveled. Surface: Bare, Painted, 2PE, 3PE. Standard: API SPEC 5L, EN10217, ISO3183, GB/T9711 Grade: Gr.B-X70 PSL1, Gr.B-X80 PSL2, L245-L555 NB P195TR1, P235TR1, P265TR1 Application: Long pressure conveying pipelines for oil and gas, Fluid conveying pipelines for gas, Water, Fire fighting, Air, Heating steam. PRODUCTION FLOW 鈥斺€斺€?/span> QUALITY INSPECTION 鈥斺€斺€?/span> PACKING AND LOADING 鈥斺€斺€?/span> APPLICATION 鈥斺€斺€?/span>SSAW Steel Pipe material website:http://www.xxtsteels.com/ssaw-steel-pipe/