1. Strong current wiring

The strong current wiring of telephone socket mould for sale is actually consistent with the ordinary switch, and at the same time is a little simpler than the ordinary switch. The actual wiring method is basically distributed by the welder, the actual will not do a specific indication. There are some differences, mainly. The wiring of traditional switch mainly takes full account of the fact that some lights must be double-controlled switch or even three-controlled, so the wiring is more complex. At present, the wiring of telephone socket mould for sale does not need to consider the problem of multi-control at all, only the corresponding lighting effect wire must be connected to the matching switch cassette. In other words, thoroughly according to the single control to carry out wiring. So, how to complete the multi - control regulation? This is the second part of the signal line to solve

2. Route signal cables

In today's telephone socket mould for sale, the key of intelligence lies in the mutual control between switches, between which an Internet is formed. According to the transmission of data signals and instructions in the Internet, the goal of automatic control can be achieved. For example, the multi-control just now transmits instructions to the switch of specific wiring according to the signal line, and instructs the switch to turn on or off the lamp.

In order to make a network of switches, signal wires must be used to connect all switches to each other. Signal cables belong to weak wires. Actual operations, such as grooving and piping, must follow the wiring standards for weak current installation. In terms of the wiring of the most popular 485 communication protocol telephone socket mould for sale, the wiring is actually relatively simple, just use the signal line to connect each switch cassette can be connected, the interface is more flexible. ​

3. Suggestions for wiring:

(1) When distributing signal lines, it is recommended to take the home information box as the starting point, and use a single five-class twisted pair wire (or network line) to associate all the open ones

(2) The connection method of signal line is system bus (series) connection. See picture 1 for the actual connection.

(3) When the signal line is on the surface, a spare 15cm above and below is embedded on each switch box, which does not need to be straightened

(4) the actual wiring, you can choose the most inexpensive method, as long as it does not violate the system bus connection, but from the perspective of data signal stability, it is best to do not have a connection head in the dark.

2. In terms of scalability and convenience, the first method is strongly recommended, and the third method is generally applied. The signal lines are centralized in one place, which facilitates the regular inspection and solution of problems. This method is to cut the house into multiple parts, each part of the area as a line, and then centralized connection at the home information box, convenient for future smart home system upgrade.

Switch wiring, according to the corresponding wiring terminals connected to the live line and the light port line, the network line according to the same tone to match the connection.

telephone socket mould for sale https://www.tangrammould.com/Telephone-Socket-Mould.html