You can easily complete Canon MG3600 setup by following correct procedures which require specific steps. The all-in-one printer is small enough to function well with its wireless printing, scanning and copying capabilities which make it suitable for both home and small office environments. The official setup portal at https ij start canon provides you with complete installation instructions which you can follow to complete your setup process.

Here is a quick step-by-step guide to help you get started

1. Unbox the Printer
The box should be opened to take out the printer which should then have all protective materials removed. The printer requires placement on a level surface which should be positioned close to an electrical outlet.

2. Power On the Printer
The power cable needs to be connected to the printer before it gets plugged into an electrical outlet. The user must press the power button to operate the machine.

3. Install Ink Cartridges
The front cover of the printer should be opened to allow installation of ink cartridges into their designated positions. The cover needs to be closed after the cartridges have been installed properly.

4. Load Paper
The paper tray should be pulled out to enable correct loading of plain paper. The paper guides need to be adjusted until the sheets achieve the correct fitting.

5. Download Printer Drivers
Your web browser should be launched to access the website https://ij.start.canon. The latest drivers and software for your device can be downloaded after you enter your printer model MG3600.

6. Connect to Wi-Fi
The printer needs to connect with your wireless network through the installation process which uses on-screen instructions. Your computer or smartphone needs to connect to the same Wi-Fi network.

7. Complete the Setup
The Canon MG3600 setup process will show successful results after you print a test page following the completion of software installation.

Your printer becomes ready for document and photo printing within a few minutes after you execute these straightforward procedures. The setup process should be repeated after you reinstall the drivers from https ij start canon which were previously installed.