According to the latest report by Fact.MR, a market research and competitive intelligence provider, the global rotary dryer market is projected to exceed a valuation of US$ 2,064 million by 2032.

North America, followed by South Asia & Oceania, has captured a significant share of the global revenue market. North America is expected to surpass a valuation of US$ 530 million by the end of 2032, registering a CAGR of approximately 5.5% over the assessment period. Meanwhile, Europe is anticipated to witness the highest CAGR of over 5.5% among all prominent regions.

For more insights into the Market, Get a Free Sample Report!
https://www.factmr.com/connectus/sample?flag=S&rep_id=3583

The continuous rotary dryer type is in highest demand, accounting for approximately 68% of the market share. This type is widely used across various applications and industries due to its ease of automation and reduced floor space requirements, which significantly lower operational costs.

The global rotary dryer market is fragmented, with numerous regional manufacturers in East Asia, South Asia, and Europe. The increasing presence of regional players may disrupt the market equilibrium in the coming years. However, the growth of end-use industries is expected to sustain the market demand over the assessment period.

Key Takeaways from Market Study

• The electricity heating source is projected to grow at a CAGR of approximately 5.9%, reaching a market valuation of US$ 406.8 million by 2032.
• The direct heated rotary drum is expected to grow at a CAGR of about 4.83%, attaining a market value of US$ 1,525.4 million by the end of the forecast period in 2032.
• The chain & sprocket drive segment is anticipated to grow at around 4.9% CAGR, reaching a market value of US$ 573.1 million by the end of the forecast period.
• Drums with a length of 15-30 meters are in highest demand, projected to grow at a CAGR of approximately 5.1% during the forecast period.
• Drums with a diameter of 1.5-3 meters also have the highest demand, expected to grow at a CAGR of about 4.3% during the forecast period.

“The Sales for Rotary Dryer is Mounting due to the Widening Industrialization across the Globe which may Further Boost the Demand,” says a Fact.MR analyst.

Share Your Requirements & Get Customized Report
https://www.factmr.com/connectus/sample?flag=RC&rep_id=3583

Competitive Landscape

Rotary dryer manufacturers are ANDRITZ AG, Anivi Ingenieria SA, Applied Chemical Technology (ACT), Baker-Rullman Manufacturing, Boardman LLC, Changzhou Fanqun Drying Equipment Co. Ltd., Comessa, Drytech International, Economy Industrial, FEECO International, Inc., FLSmidth Inc, GEA Group, General Kinematics, Hazemag, Heyl Patterson Thermal Processing, KURIMOTO, LTD, Louisville Dryer Company, Metso Corporation, Mitchell Dryers Ltd., Schenck Process Holding GmbH, SWISS COMBI, The Onix Corporation, ThyssenKrupp AG and Westpro Machinery.

Market players have developed long term collaboration with end use industries in order to streamline the supply chain. Also, the tenders from government agencies are captured by leading players which are contracted for 4-5 years, involving installation, maintenance and replacement of rotary dryer. Leading players are constantly increasing their geographical presence through capturing local and region distributors across promising geographies.

• In July. 2021 DTG Recycle, has announced the acquisition of Cascade Recycling's assets for an undisclosed price. Cascade Recycling provides and services recycling containers and operates a recycling facility. In recycling facility rotary dryer is widely used.
• In Sept. 2021, Atlas Copco strengthened its market presence in France by acquiring AEP, a Paris-based distributor of compressors and provider of service. This would increase company’s presence leading to consistency in demand

Browse Full Report: https://www.factmr.com/report/3583/rotary-dryers-market

Segmentation of Rotary Dryer Industry Research

• By Dryer Type :
• Batch Rotary Dryer
• Continuous Rotary Dryer
• By Drum Design :
• Single Shell
• Multi Shell
• Double Shell
• Triple Shell
• By Drum Diameter :
• Up to 1.5 M
• 1.5-3 M
• 3-6 M
• Above 6 M
• By Drum Length :
• Up to 15 m
• 15-30 m
• 30-50 m
• Above 50 m
• By Capacity :
• Up to 10 Tons/hr
• 10-50 Tons/hr
• 50-100 Tons/hr
• 100-250 Tons/hr
• 250-500 Tons/hr
• Above 500 Tons/hr
• By Drive Type :
• Chain & Sprocket Drive
• Gear & Pinion Drive
• Friction Drive
• Direct Drive
• By Heating Type :
• Direct Heated
• Counter Current (Counter Flow)
• Co-Current Flow (Parallel Flow)
• Indirect Heat
• By Heating Source :
• Fuel Oil
• Natural Gas/Propane
• Waste Heat
• Biogas
• Electricity
• By Application :
• Aggregates
• Agricultural By-Products
• Animal Feeds
• Biomass
• Chemicals
• Fertilizers
• Minerals & Ores
• Plastic and Polymer
• Salts & Sugars
• Waste & Sewage Sludge
• Others
• Indirect Heat
• By Material :
• Steel
• Carbon Steel
• Stainless Steel
• Abrasion Resistant (AR) Steel
• Specialist Alloys
• By Region :
• North America
• Latin America
• Europe
• East Asia
• South Asia & Oceania
• MEA

Market Development

Tier-1 manufacturers across the globe are primarily focused towards the product advancement by integrating automation. Collaborating and acquiring regional players to widen their customer reach and mitigate the regional price clusters which may aid to acquire larger share of market over medium and long term forecast period.

There are less substitutes for rotary dryers. Whereas, conventional technology segment such as batch rotary dryers were used few decades back. High technological advancement and surging R&D expenditure is attributed to introduce new technologies in the market during the forecast period.

More Valuable Insights on Offer

Fact.MR, in its new offering, presents an unbiased analysis of the global rotary dryer market, presenting historical market data (2017-2021) and forecast statistics for the period of 2022-2032.

The study reveals essential insights on the basis of dryer type (batch rotary dryer, continuous rotary dryer), by drum design (single shell, multi shell (double shell, triple shell)), by drum diameter (up to 1.5 m, 1.5-3 m, 3-6 m, above 6 m), by drum length (up to 15 m, 15-30 m, 30-50 m, above 50 m), by capacity (up to 10 tons/hr, 10-50 tons/hr, 50-100 tons/hr, 100-250 tons/hr, 250-500 tons/hr, above 500 tons/hr), by drive type (chain & sprocket drive, gear & pinion drive, friction drive, direct drive), by heating type (direct heated (counter current or counter flow, co-current flow or parallel flow), indirect heat), by heating source (fuel oil, natural gas/propane, waste heat, biogas, electricity), by application (aggregates, agricultural by-products, animal feeds, biomass, chemicals, fertilizers, minerals & ores, plastic and polymer, salts & sugars, waste & sewage sludge, others), by material (steel (carbon steel, stainless steel, abrasion resistant steel), specialist alloys) across six major regions (North America, Latin America, Europe, East Asia, South Asia & Oceania, and the Middle East & Africa).

𝐂𝐨𝐧𝐭𝐚𝐜𝐭:

US Sales Office
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Tel: +1 (628) 251-1583, +353-1-4434-232
Email: sales@factmr.com