The conversion of your Linksys Velop into an access point, in fact, belies certain technicalities of this process as it allows the utilization of the nodes for Wi-Fi amplification in your home or office. Provided you already have a DHCP router, this arrangement allows your Velop nodes to act solely as signal extenders, which means your network routing is not controlled by these.

Please keep in mind these are steps you need to follow to get your Linksys Velop as Access Point up and working:

1. Finish the Initial Configuration

Use the Linksys app or the online interface to configure your Velop system in the regular router mode. Connect the primary node to your modem and follow through with the application's instructions to bring your network online.

2. Firmware Update on Your Linksys Velop

Before switching the mode, a firmware update is a must-have. Use the Linksys Velop login details to access the system via the web interface (usually, http://192.168.1.1 or http://linksyssmartwifi.com). Either manually update or use auto-update by going to Connectivity > Firmware Update. The latest Linksys Velop firmware update assures you with stability and compatibility.

3. Switch to Access Point Mode.

In the aftermath of the upgrade, open the Linksys app or web interface and navigate to Settings > Advanced Settings > Internet Settings. Select Bridge Mode (Access Point Mode on some versions). With your main router performing network duties, this disables routing, thereby letting your Velop distribute Wi-Fi.

4. Restart and reconnect.

After the changes have been accepted, the Velop node must be rebooted. Subsequent to this resumption, it must be connected to the main router via Ethernet. A solid blue LED is indicative of a good configuration.

Linksys Velop used in access point mode helps maintain consistent Wi-Fi while maintaining the existing network infrastructure. Make sure to use strong passwords for Linksys Velop login to protect your system. Do keep an eye out for the latest Linksys Velop Firmware Update.

Read more about it on our site.