Spring Maintenance
Spring is the time to start the year with a clean slate. After the winter months, your garden submersible pump may have accumulated debris and sediment. Follow these steps to ensure it's ready for the growing season:

Inspect the Pump: Remove the pump from the water and check for any visible damage, such as cracks or leaks. Ensure that the impeller and filter are free from debris.
Clean the Filter: If your garden submersible pump has a pre-filter, clean it thoroughly to remove any accumulated dirt or algae. Use a soft brush and mild detergent if necessary.
Test the Pump: Reinstall the pump and test it to ensure it's functioning properly. Check for any unusual noises or vibrations that might indicate a problem.
Check the Electrical Connections: Inspect all electrical connections and cords for signs of wear or damage. Replace any damaged parts before using the pump.
Summer Maintenance
Summer is the busiest time for your garden submersible pump, as it works hard to maintain water features and irrigation systems. Regular maintenance during this season can prevent breakdowns and ensure good performance:

Monitor Water Levels: Keep an eye on the water levels in your pond or fountain. Low water levels can cause the pump to overheat and malfunction.
Regular Cleaning: Clean the pump and filter more frequently during the summer months to prevent clogging. Algae growth is more common in warm weather, so be vigilant.
Check for Leaks: Regularly inspect the pump and its connections for any leaks. A small leak can quickly turn into a big problem if left unchecked.
Protect from Heat: If possible, provide some shade for the pump to protect it from direct sunlight, which can cause overheating.