Your Eufy camera's WiFi settings might need to be updated if you're changing internet providers or updating your router. When a network update causes their Eufy camera to go offline, many users become perplexed. The method is simpler than you may imagine, so don't worry. Here's a detailed tutorial on how to reset your Eufy camera's WiFi and restore its functionality.

1. Recognize the Reasons Behind Your Eufy Camera's Outage

Your camera is still attempting to connect using the previous credentials after you change the password or SSID for your home WiFi network. Your Eufy camera offline because of this. It can only be reconnected by changing the WiFi settings.

2. Reset Camera

As of right now, Eufy does not support WiFi adjustments through the app without requiring a device reset. To start:

• Find your camera's reset button, which is often located next to the charging port.

• Holding down the button for around ten seconds will cause the LED to flash or you to hear a voice prompt.

• By doing this, the camera will be factory reset, erasing all prior settings.

3. Add the camera again.

• Launch the Eufy Security app and enter your Eufy log in information.

• To add a new device, tap the "+" symbol.

• After choosing your camera model, adhere to the on-screen directions.

• Enter your new WiFi network name (SSID)  and password when asked.

• Since Eufy cameras do not support 5GHz networks, make sure your phone is linked to the same 2.4GHz WiFi network during setup.

Concluding remarks

Resetting the gadget may seem like a pain, but it's the only method to switch the WiFi on a Eufy camera at the moment. However, the setup procedure is short, and your security system will be operational again soon.

Just remember to reset and reconnect if your Eufy camera is not working. 

Go to our webpage to know more about eufy camera change wifi.