Actueel
  • Tile trim factory
    Where to wholesale tile profile factory stainless steel plates? After the above introduction, Presumably everyone can have a certain understanding of this problem, you can know that if you want to wholesale this kind of material, where to wholesale will be more appropriate, although it is said that you can go directly to the manufacturer wholesale, but also pay more attention to the...
    0 Reacties 0 aandelen 6206 Views
  • Stainless steel edging strip
    Carbon steel and stainless stainless steel edging strip steel are a kind of steel, but the elements they contain are not the same, resulting in different performance, their use time and occasion are not the same.Stainless steel is not easy to rust, is to have corrosion, rust resistance of steel, they distinguish other steel is containing "chromium" and "nickel", chromium and nickel...
    0 Reacties 0 aandelen 6249 Views
  • Metal trim manufacturers
    Aluminum trim is a covalent bonding material with a hexagonal crystal aluminium tile trim profiles structure that can be laser cut or etched. These types of nitrides are stable at extremely high temperatures in an inert atmosphere and form a layer of alumina on their surface. Unstable in hydrogen and carbon dioxide atmospheres, slow dissolution and hydrolysis in water and inorganic...
    0 Reacties 0 aandelen 5724 Views
  • Aluminum tile edge trim
    What is an aluminium trim strip? Aluminum trim strips In this case, the laser resonator is aligned with the orthogonal direction of the semiconductor aluminum nitride tile plane to allow vertical emission of light. It is also prominent in facial recognition technology in cellular devices, where aluminum trim strips can be produced in high-volume, low-cost production using a batch semiconductor...
    0 Reacties 0 aandelen 5924 Views
  • Tile trim manufacturers
    The chip design on the heat sink is also used in the new Sic power module with aluminum tiles with integrated cooler, where the cooler consists of a copper-plated liquid flow aluminum nitride cooler on both sides and an optimized needle fin structure. The heatsink measures 48 x 36 mm, is 3.6 mm thick (including metal plating) and weighs 10 g. The cooler with china tile trim the...
    0 Reacties 0 aandelen 5516 Views
  • Stainless steel tile edge trim
    These four common high-temperature ceramic substrates, 99Al 2O3, 97Al 2 O3, Sapphire and ZrO 2, have good oxidation and corrosion resistance and maintain stable performance even in harsh environments. Since the material processing technology of these ceramics is very mature, it is expected that it will be possible to use them to prepare high-temperature sensors that can work above 1000 °C....
    0 Reacties 0 aandelen 5661 Views
Meer blogs